Filter
Top Products
USING SETUP MODE
Table 5.3 MENU1 and MENU2 Items and Options
NOTES:
• Underlined options are the factory defaults.
•
MENU1 and
M
Asterisks identify items and options that differ for the IBM XL24E
and Epson ESC/P2 emulations. The notes are defined at the end of
the table.
ENU2 Items
Options Description
<EMULATE> Select the same emulation as is selected in
your software. See the section Selecting an
Emulation in Chapter 2 for information on
selecting an emulation.
DPL24C+ Fujitsu DL-series printers
(DPL24C PLUS command set)
XL24E
ESC/P2
n printers
using the ESC/P2 command set
factory defaults for that emulation.
IBM Proprinter XL24E printers Epso
NOTE: When you change the emulation, all
MENU1 or MENU2 options are reset to the
<FONT>
COUR 10
PRSTG12
COMPRSD
BOLDFCE
PICA 10
OCR-A
COUR-N
COUR-I
N.SAN-N
B
N.SAN-I
er the
ou change the font, be sure
t
CORRESP
OCR-B
COUR-B
N.SAN-
For each of the following fonts, the
recommended pitch settings are given aft
font name. When y
o also change the pitch, if required.
5-14 User's Manual