Filter
Top Products
USING SETUP MODE
4. Select the current emu
Since you do not want to
lation.
change the emulation, press the “T”
5.
n the
t
6.
T
,
on.
2,
.
8.
button to select the current emulation and print the next item,
<FONT> and its options.
Change the font to Prestige Elite 12.
Press the “TEAR OFF” or “LOAD” button once to positio
cursor on the left edge of the aluminum print guide on
PRSTG12. Press the “T” button to select PRSTG12 and prin
the next item, <QUALITY>, and its options.
Select the current print quality.
Since you do not want to change the print quality, press the
button to select the current print quality and print the next item
<PITCH>, and its options.
7. Change the pitch to 12 cpi and exit the MENU2 functi
Press the “TEAR OFF” or “LOAD” button once to position the
cursor on the left edge of the aluminum print guide on 12 CPI.
Since you do not want to make any other changes in MENU
press the ONLINE button to select 12 CPI and exit MENU2
The <<FUNCTION>> menu is then reprinted.
Exit setup mode, saving the new font and pitch.
Since the cursor on the left edge of the aluminum print guide is
on SAVE & END, press the S MICRO FEED button or the T
MICRO FEED button to select SAVE & END. The printer
saves Prestige Elite 12 and 12 cpi as the new power-on defaults
in MENU2. The printer then exits setup mode and returns
online. These settings remain in effect until changed.
User's Manual 5-7