Filter
Top Products
SETTING UP
3. Select the MENU1 function.
Locate the cursor on left edge of the aluminum print guide.
Initially, this cursor should be positioned at SAVE & END at
D the beginning of the <<FUNCTION>> menu. Press the LOA
button repeatedly to position the cursor at MENU1, as shown
below:
o select MENU1 and print
<EMULATE>
DP
Press the T MICRO FEED button t
the following <EMULATE> options:
L24C+ XL 42 E ESC/P2
d
PLU
4. Sele
Pres
requ
the
5. Exit
Pres he MENU1 function and
repr
6. Exit setup mode to save the emulation.
To exit setup mode and save the new emulation, make sure that
the cursor is positioned under SAVE & END. Then press the
T MICRO FEED button. The printer selects SAVE & END and
then goes online.
To change other printer settings using the printer setup mode, see
Chapter 5.
The currently selected emulation is indicated by a short
un erline. In the figure shown above, the Fujitsu DPL24C
S emulation is selected.
ct an emulation.
s the LOAD button repeatedly to position the cursor at the
ired emulation. Press the T MICRO FEED button to select
emulation and print the next MENU1 item.
MENU1.
s the ONLINE button to exit t
int the <<FUNCTION>> menu.
2-26 User's Manual