Filter
Top Products
32
Replacing built-in Battery Unit
Prior to replacing the built-in battery pack, it is required to save the programs and data to the
hard disk, etc. This section describes how to replace the built-in battery pack.
WARNING
Electric shock
• Before replacing the built-in battery pack, be sure to switch the PC power off and
disconnect the AC adapter. Do not touch the connectors on the PC and the battery
pack.
1 Switch the PC power off and disconnect the AC adapter.
2 Close the LCD display and turn the PC over.
3 Release the lock.
To release the lock, slide the release button (1) on the bottom surface and the built-in battery
pack lock (2) at the same time.
Built-in battery pack lock
Release button
1
2
Thyme Sec1_27-33 19/10/2000, 20:2132