Filter
Top Products
62
3 Connect the display cable to the CRT display.
Refer to the CRT display manual for the details on connection.
4 Connect the CRT display power cable and switch the display power on.
5 Connect the AC adapter to the PC and switch the PC power on.
Critical Points
If you turn the power on after connecting an external display, you may experience the
following phenomena:
The same screen image is displayed on both of the liquid crystal display on the PC unit and
the external display.
“Add New Hardware Wizard” dialog box appears.
In such cases, follow the instruction on the display to install the driver for the external display.
6 Select the display to use.
When you push down the [F10] key while pressing down the [Fn] key, you can select the display
to use in the order of LCD to CRT to the simultaneous display to LCD. And you can select the
display also from “Display Property” in the operating system.
Thyme Sec2_61-64 19/10/2000, 20:2262