Filter
Top Products
58
SECTION 2
10
Connecting Numeric Keypad / Keyboard / Mouse
The extended keyboard connector on the connector box can be used to connect a PS/2 numeric
keypad, etc. This section describes connection of a numeric keypad.
1 Switch the PC power off or suspend the PC.
2 Install the connector box.
3 Connect the numeric keypad.
Connect the numeric keypad to the extended keyboard connector on the connector box. Make
sure that the arrow mark on the connector is on the top.
Critical Points
The numeric keypad is usable only when the PC is in the numeric key mode.
The mouse connector on the numeric keypad can be used to connect a mouse.
Adjust the slanting angle of the numeric keypad using the tilt foot on the bottom surface of
the keypad.
The extended keyboard connector can also be connected with a 101 keyboard.
Mouse connector
Thyme Sec2_50-60 19/10/2000, 20:2258