Filter
Top Products
68
The remaining battery charge indicator does not stop flashing.
Checkpoint
Is the battery connected
correctly?
Is the battery low?
Cause and Solution
Check that the battery is connected correctly. If it is connected
correctly, there is an abnormality in the battery pack, so replace
the battery pack.
Attach the AC adaptor and charge the battry.
Floppy disk can not be used.
Checkpoint
If the floppy disk loaded into
the floppy disk drive correctly?
Is the floppy disk formatted?
Is Diskette A set to Not
Installed in the BIOS setup?
Is Diskette access set to
Supervisor only in the BIOS
setup?
Is the floppy disk write
inhibited?
Does it work with a different
floppy disk?
Cause and Solution
Insert the floppy disk with its label facing up, into the drive
shutter and keep inserting firmly until you hear a clicking sound.
New floppy disks can not be used until they are formatted
(initialized). Format the floppy disk.
Check the Diskette A item in the BIOS setup Main menu.
Check the Diskette access item in the BIOS setup Security
menu.
Set the write protect tab on the floppy disk to the write enable
position.
If it works with a different floppy disk then the problem floppy disk
may be damaged.
Thyme Sec3_65-70 19/10/2000, 20:2368