Filter
Top Products
93
[Power saving mode] button
This specifies the power saving mode.
If this button is clicked, the following dialog box is displayed.
− Quick Start Mode
This mode keeps the lamp on regardless the scanner’s operating condition, which
saves times for lamp to become steady.
− Low Power Mode
To save the power consumption, this mode turns the lamp off, if the scanner is not
operated for 14 minutes.
* This button may not be displayed for some scanner models.
[Multifeed] button
Use this to specify multifeed detection area.
By default Multifeed Detection
monitors paper overlap over the central column (width: 35
mm) of the document to be scanned. This will lead to mis-detection when the document is
partially pasted with photographs or clippings.
When scanning these kinds of documents, you can specify an exact detection area to
prevent mis-detection.
Click on the button and the following screen will appear.