Filter
Top Products
138
Product: M3096GX
1
(fi-4620S, VSP310)
Type: Desktop
Image sensor: Reduced optical system
Operating method: Document fixed, scanner unit moving (flat bed),
Automatic Document Feed (ADF)
Light source: Xe discharge tube (Green)
Basic resolution: 400 dpi
Output resolution: Standard: 400, 300, 240, 200 dpi
With image processing option: 50 dpi to 800 dpi (at steps of 1)
Grayscale levels (internal): 8 bit 256 levels
Grayscale output: Enabled (8 bits)
Halftone Patterns: Dither matrix (can be downloaded), Error diffusion
Flat bed scanning speed: 2.0 sec or less (A4, 200 dpi)
ADF scanning speed
2
: 21 pages/minute (200 dpi, A4, 55 kg)
ADF paper chute capacity: Maximum 50 sheets, (ream weight: 55 kg, A4 [High quality
paper, Normal temperature and humidity])
Document size: Maximum 297 mm
x 432 mm A3 or Double letter sized paper
Supported regular paper
3
: A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape,B4,
B5/B5 Landscape, B6/B6 Landscape, Letter, Letter Landscape,
Legal, Double letter, US Executive/US Executive Landscape
Scanning area specification: Specified (one location)
White level follower: Enabled
Brightness / Threshold / Contrast : 255 steps
Gamma patterns: 3 internal types (can be downloaded)
Image processing function: Simplified Dynamic Threshold (SDTC)
Image processing option installed
Edge emphasis, Edge extraction, Automatic separation, Mirror
image, Reverse image, Dynamic Threshold (DTC), Smoothing,
Filtering, Noise removal
Individual setting: Disabled
Interface: SCSI-II
Preview: Enabled (at Flat bed scanning only)
Flip Side Rotation: Disabled
Rotation: Enabled
Automatic Size and Skew detection: Disabled
1. Use of this scanner may require installation of the optional image compression option board (CMP-2) in the
scanner device.
2. This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system
configuration.
3. Not all sizes of paper can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.