Fujitsu P3PC-1492-04ENC2 Scanner User Manual


 
166
Product: fi-5220C
Type: Desktop
Image sensor: Color CCD (Reduced optical system)
Operating method: Document fixed Flat bed (FB), Automatic Document Feed
(ADF), Simultaneous double-sided scanning,
Long page scanning : Max 216mm x 864mm
Light source: Fluorescent tube (White)
Basic resolution: 600dpi
Output resolution: 50 dpi to 600 dpi (at steps of 1dpi)
Grayscale levels (internal): 10 bit 1024 levels
Grayscale output: Enabled (8 bits)
Halftone Patterns: Dither matrix (can be downloaded), Error diffusion
Color (24bit) output: Enabled
Flat bed scanning speed: B/W : 2.2 sec or less (200 dpi, A4)
Color : 1.7 sec or less (150 dpi, A4)
ADF scanning speed
1
: B/W
Single sided: 25 pages per minute (200 dpi, A4, 80g/m
2
)
Double sided: 25 pages per minute (200 dpi, A4, 80g/m
2
)
(=50 screens per minute)
Color
Single sided: 30 pages per minute (150 dpi, A4, 80g/m
2
)
Double sided: 30 pages per minute (150 dpi, A4, 80g/m
2
)
(=60 screens per minute)
ADF paper chute capacity: Maximum 50 sheets (A4, 80g/m
2
, High quality paper, normal
temperature and humidity)
Document size: Minimum 53mm
x 74 mm
Maximum 216mm
x 355.6mm <ADF>
Maximum 216 mm
x 297 mm <Flat Bed>
Supported regular paper
2
: A4, A5/A5 Landscape, A6/A6 Landscape, B5,
B6/B6 Landscape, Letter, Legal, US Executive, Name card
Scanning area specification: Specified (one location)
White level follower: Disabled
Brightness / Threshold / Contrast: 255 steps
High light / Shadow : 255 steps (at Color / Grayscale scanning)
Gamma pattern: Internal types are not available. (Cannot be downloaded)
At custom specification, entering a value enables to set a pattern.
1
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
2
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.