Fujitsu P3PC-1492-04ENC2 Scanner User Manual


 
177
Product: fi-60F
Type: Desktop
Image sensor: LED(RGB) + Reduced optical system
Operating method: Document fixed Flat bed(FB)
Light source: LED (R, G, B)
Basic resolution: 600 dpi
Output resolution: Standard: 50 dpi to 600 dpi (at steps of 1dpi)
Grayscale levels (internal): 16 bit 65536 levels
Grayscale output: Enabled (8 bits)
Halftone Patterns: Dither matrix (can be downloaded), Error diffusion
Color output Enabled (24bit)
Flat bed scanning speed: B/W : 1.0 sec or less (200 dpi, A6)
Color : 1.3 sec or less (150 dpi, A6)
Document size: Maximum 148 mm
x 105 mm
Supported regular paper: A6, Name card
Isolation specification: Specified (one location)
White level follower: Disabled
Brightness / Threshold / Contrast : 255 steps
High light / Shadow : 255 steps (at Color / Grayscale scanning)
Gamma pattern: Internal types are not available. (Cannot be downloaded)
At custom specification, entering a value enables to set a pattern.
Image processing function: Simplified Dynamic Threshold (SDTC), Edge emphasis,
Edge extraction, De-Screen, Reverse image, 256 Color, 8 Color,
4bit Grayscale
Individual setting: Disabled
Interface: USB 1.1/2.0
Preview: Enabled
Flip Side Rotation: Disabled
Rotation: Enabled
Automatic Size and Skew detection: Automatic Page Size Detection
Overscan: Disabled
Buffer scan ([Use Memory on Scanner]) function: Disabled
Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function: Disabled
Batch Detection: Disabled
Multifeed detection: Disabled
Pre-Pick: Disabled
Check Over-skew: Disabled
Blank page skip: Disabled