Filter
Top Products
136
Chapter 6: Advanced Configuration and Management
www.gateway.com
Packetized data transfers/QAS
Packetized protocol is provided for transferring commands, status, and data.
The system sends this information in packets that are protected with a CRC.
These packets are also sent synchronously to reduce the protocol overhead. This
option is set Enabled by default for 320 MB/sec data rates, and is required for
320 MB/sec operations.
To set the packetized protocol:
1 From the Main Menu, select Configuration Menu, then press ENTER. The
Hardware Configuration Menu opens.
Tips & Tricks The default setting of “Enabled” should be valid for most
systems