Filter
Top Products
31
Creating arrays
www.gateway.com
7 Select the desired chunk size from the menu, then press ENTER. The Drive
Selection Menu opens.
8 Select the drives for the new array by doing the following:
The controller will list all the available drives for each attached
enclosure(s). You can choose to add a drive to the array by highlighting
the drive, then pressing the U key. Or you can select all the available drives
by pressing the A key. Remove a drive that has been selected by pressing
the R key, or remove all of the drives selected by pressing the C key.
Tips & Tricks If you have multiple enclosures, the enclosure you are
viewing is displayed at the top of the page. To move to the
drives in the next enclosure, highlight the last drive in the
column or row and press the right or down arrow key.