Filter
Top Products
24
Chapter 3: Creating Disk Arrays
www.gateway.com
2 From the Configuration Menu, select View Configuration, then press ENTER.
The View Configuration Screen opens.
The following table provides a description of the fields shown on the screen.
3 Press ESC to return to the previous screen.
Field Description
No. Drive number in the array.
Vendor ID Indicates the manufacturer of the drive.
Product ID Drive model number.
F/W Drive firmware version.
Ser. No. Drive serial number.
Cap. Drive capacity expressed in GBs.
EN, SL The enclosure and drive slot number, used for drive
identification.
ST The drive status, will either be “OK” or “FL.”