Filter
Top Products
187
Drive events
www.gateway.com
Drive Rebuild Failure
SN:
xx xx xx xx xx xx
A:
yy
D:
zz
Rebuild has failed because
of an unrecoverable error on
another drive in the array.
The meaning of each field is
as follows:
SN: Serial Number
A: Array number
D: Drive number in array
Typically because
of a
non-recoverable
media error or
hardware error.
Backup all data
and restore to a
new array.
Drive Status aa
SN:
xx xx xx xx xx xx
P
y
OP:
zz
The drive indicated has
returned an unknown status
to a command. The meaning
of each field is as follows:
SN: Serial Number
P: Drive port number
OP: SCSI command code
Unknown status
returned by the
hard drive.
Contact Technical
Support and
provide them with
a copy of the event
log.
Drive Task Full
SN:
xx xx xx xx xx xx
P
y
OP:
zz
The drive indicated has
returned a Task Full to a
command. The meaning of
each field is as follows:
SN: Serial Number
P: Drive port number
OP: SCSI command code
Drive is busy and
cannot accept any
more commands.
No action
necessary.
Drive Timeout
SN:
xx xx xx xx xx xx
P
y
OP:
zz
The drive indicated has
timed out for the specified
command. The meaning of
each field is as follows:
SN: Serial Number
P: Drive port number
OP: SCSI command code
Drive hardware
error.
Check cabling,
Disk I/O cards,
and make sure the
hard drives are
correctly seated.
Drive Timeout Failure
SN:
xx xx xx xx xx xx
A:
yy
D:
zz
The drive listed has failed
because of a timeout. The
meaning of each field is as
follows:
SN: Serial Number
A: Array number
D: Drive number in array
Drive error. Replace the hard
drive.
Drive Event Messages Description Cause Action