Filter
Top Products
11
Navigating the SATA RAID configuration utility
www.gateway.com
Menu system (continued)
RS232 Setting
115200
57600
38400
19200
9600
Port ID Selection
View Array
Create Array
Delete Array
Expand Array
Array Cache Configuration
View Unused Drives
Advanced Array Configuration
Array Configuration Menu
LUN Configuration Menu
Hardware Configuration Menu
LUN Management
SAN LUN Mapping
Controller LUN
Port ID Settings
Controller Port Data Rate
RS232 Settings
Packetized SCSI/QAS
Hot Spare Configuration Menu
View Hot Spare Drive Configuration
Add or Remove Pool and Dedicated Spare
Rebuild Parameters Menu
Auto Rebuild and Set Priority
Auto Hot Spare
Auto Rebuild: Disabled Rebuild Priority: 50%
LUN Management
View Logical Drive
Create Logical Drive
Expand Logical Drive
Set Availability
Delete Logical Drive
View Unassigned Free Space
Modify Mapped LUN Number
SAN LUN Mapping
View SAN LUN Mappings
Create SAN LUN Mapping
Delete SAN LUN Mapping
Modify SAN LUN Mapping
View Connected Hosts
Create Array
Initialize Array
Trust Array
Displays Array Information
Displays the Unused Drives
Displays Spare Drives
Select an Array
Add Drives to the Array
Add Sub-Arrays to Current Array
Read-Ahead Cache
Writeback Cache
Packetized SCSI/QAS
Set Controller Port 0 Data Rate
Set Controller Port 1 Data Rate
Enable/Disable
Controller Port 0 Hard Address: 04
Controller Port 1 Hard Address: 05
Controller LUN Number: 000 Current
Auto Hot Spare: Disabled
Select an Array
Delete the Array
Select Drive
Add/Remove
Steps through the
create array process.