Filter
Top Products
57
Expanding an array
www.gateway.com
6 Press the up and down arrow keys to select a drive, then press X to mark
that drive for expansion. Continue to select additional drives if necessary,
otherwise press C
TRL + D to continue.
You can cancel your selection by highlighting the drive and pressing R,
or remove all selected drives and start again by pressing C.
7 When you are prompted to save the changes, select Yes, then press ENTER.
8 Press any key to continue.
Adding additional sub-arrays
To add additional sub-arrays:
1 From the Main Menu, select Configuration Menu, then press ENTER. The
Configuration Menu opens.