Filter
Top Products
222
Chapter 10: Diagnostics
www.gateway.com
3 From the Online Diagnostics menu, select Target Command Trace Settings,
then press E
NTER. The Target Command Trace Settings screen opens.
4 From the Target Command Trace Settings screen, press ENTER to toggle the
command trace to be Enabled or Disabled.
When enabled, all incoming commands will be displayed on the terminal
until the trace mode is disabled.
5 Press ESC to return to the previous menu.
Important The command is on port 1 (T1) from the host with ID 124
(ID:7c) for LUN 0. The command is a SCSI inquiry
command (CDB: 12).