Filter
Top Products
74
Chapter 4: Logical Drives
www.gateway.com
6 Press the up and down arrow keys to change the desired number of Host LUNs
to create, then press E
NTER. The LUN Size screen opens.
7 Press the up and down arrow keys to change the desired size of the LUN, then
press E
NTER.
The value displayed is the default size of the logical drive that can be created
using the number of logical drives set in the previous screen based on the unused
region space. If you are creating an even number of logical drives from an odd
size value the remaining unused space is made available as unused space from
which another separate logical drive can be created. For example, if you have a
fault tolerant array with unused region of 143 GB and you create 2 logical drives
from that unused space, you will have two logical drives each with 71 GBs. After
you create the logical drives and view the unused region you will see the
remaining 1 GB available for use in another logical drive.
8 When you are prompted to save the configuration, select Yes, then press ENTER.
9 Press any key to return to the Main Menu.
Important The number shown as the default is the maximum number
of 1 GB logical drives you can create using the selected
free space region in the previous step. In this case the free
space region was 29 GB which yielded a total of 29, 1 GB
Host logical drives.