Filter
Top Products
35
Creating arrays
www.gateway.com
13 Save the configuration to create the array. Click Yes, then press ENTER. You
will see a message that the configuration is being saved.
14 After it has completed the process, press any key to continue.
15 Continue with setting up the Array Read-Ahead Cache and Writeback
Cache, then go to the Hot Spare drives options.
Important You must initialize the array before using the logical drives
created from the array.
Tips & Tricks After you have completed these tasks, go to the next
chapter. Create the logical drives and perform the LUN
assignment to complete the setup. Additionally, for more
control over the logical drives, see “SAN LUN Mapping” on
page 89 and perform your appropriate mappings.