Filter
Top Products
CHAPTER 2: Getting Started
26
If you need to change drive technology, a new column of drives should be populated.
All members of the column should have the same drive type.
Drive start
With two active power supply modules installed (required), all drives start immediately.
Activating the anti-tamper locks
The anti-tamper locks are installed in the drive carrier handles and are accessed through the small
cutout in the latch section of the handle.
Drives are supplied with the locks set in the locked position.
To activate the locks:
1 Carefully insert the provided lock key into the cutout in the handle.
2 Rotate the key clockwise until the indicator is visible in the opening beside the key.
3 Remove the key.
4 To deactivate the lock, rotate the key counter-clockwise until the indicator is no longer visible
in the opening beside the key.
Column/row 1/# 2/# 3/# 4/#
#/1 - SAS 2 SATA 3 -
#/2 - SAS 6 SATA 7 -
#/3 - - SATA 11 -
Important
You cannot install a drive carrier if its anti-tamper lock is activated before installing
it into the enclosure.