Filter
Top Products
CHAPTER 4: Troubleshooting
14
Ops panel LEDs
The Ops panel displays the overall status of all the modules. The Ops panel LEDs are described in
the following table.
“X” = no bearing on these states
Important
The Ops panel is supplied as an integral part of the enclosure core product and is not
user replaceable.
Ops panel LEDs Other associated
LEDs or alarms
State description
Power
On
(Green)
System
Fault
(Orange)
Logical
Fault
(Orange)
Box
Identify
(Blue)
On On On On
Single beep, two
double beeps
Power On Self Test
On Off Off X
Power On, all functions good
On On X X
Power supply
module Fault LED
or Cooling Module
Fault LED
Any power supply module fault or fan fault
Over or under temperature
On On X X
RAID Controller
Fault LED
A RAID controller fault
On X On X
Drive Fault LED A drive failure has occurred, causing loss of availability
or redundancy.
On X On X
Array is performing a background function, such as
parity check, initialization, or expansion.
XXXOn
Enclosure identification mode. When lit, it identifies a
specific enclosure.