Filter
Top Products
www.gateway.com
25
Removing a battery module
To remove a battery module:
• Operate the release latch and slide the battery module out of the controller module.
Installing a battery module
To install a battery module:
1 Check for damage. Do not install if there are any outer signs of damage.
2 Slide the battery module into the vacant slot on the right side of the controller module until
it clicks into place.
Removing and replacing a disk I/O module
To remove and replace a disk I/O module in an expansion enclosure, follow the procedures for
removing and replacing a controller module (see “Controller module” on page 22).