Filter
Top Products
CHAPTER 2: Setting Up Your Monitor
16
3 Connect other audio sources (such as a DVD player or
audio receiver) to the appropriate audio jacks on the
back of the monitor.
• For basic audio quality, connect your audio source to
the L/R (two-channel stereo) audio in jacks for the
device. Your monitor has L/R stereo jack pairs that
are associated with S-Video, Composite (standard),
and Component video modes (cables not included).
• For best audio performance, if your video connection
uses HDMI, the digital audio is also conveyed along
the same cable, and no additional audio connection
is required. You may need to set your video source’s
audio mode to PCM or ANALOG to hear the audio.
See your source device’s user guide for more
information.
You can connect your monitor to another audio device, such
as an audio receiver, to project the sound.
Important
The connector type used for S-Video, Composite, and Component
audio inputs is also known as an RCA connector.
Important
The connector type used for DVI mode audio and VGA mode audio
inputs is also known as a 3.5mm stereo connector.
S/PDIF OUT (coaxial)
Audio out
DVI mode audio
VGA mode audio
S/PDIF OUT (Toslink)
S-Video audio in
Composite audio in
Component audio in
8512322_XHD3000 Usr Gde.book Page 16 Friday, August 10, 2007 12:33 PM