Filter
Top Products
CHAPTER 2: Setting Up Your Monitor
20
4 Plug the speaker bar’s power and audio plugs into the
appropriate connectors underneath the monitor.
For information on using the speaker bar, see “Using the
speaker bar” on page 40.
Connecting the USB hub
Your monitor has a built-in, powered, USB 2.0 6-port hub. When
connected to your computer’s USB port, the hub provides six
USB ports for connecting as many as six USB-compatible
devices.
To connect the USB hub:
1 Turn on your computer, then install the EzTune software
from the included EzTune installation CD.
2 Position your monitor so you can reach the back.
Important
For the monitor’s USB hub to provide high-speed USB 2.0 connections, the
hub must be connected to a USB 2.0 port on your computer. If the hub is
connected to a USB 1.1 port, the monitor’s ports will provide only the slower
USB 1.1 connections.
Important
This monitor requires a driver to work correctly. The driver is included on
the EzTune installation CD.
Speaker bar power
Speaker bar audio
8512322_XHD3000 Usr Gde.book Page 20 Friday, August 10, 2007 12:33 PM