Filter
Top Products
www.gateway.com
29
• Amber—The monitor is not detecting a video source.
Check the video input connections and make sure
that the computer is turned on and connected
correctly to the monitor.
• Blue—The monitor is detecting a video source.
For more troubleshooting information, see
“Troubleshooting” on page 43.
3 Adjust the tilt of the monitor for the best viewing angle.
4 For VGA input only: After you see the Windows
desktop, touch (Menu) on the front of your monitor,
then touch (Auto) to automatically adjust your
display image to the ideal settings.
5 Use the on-screen display (OSD) to adjust other monitor
settings. For more information, see “Using the EzTouch
menu” on page 29.
Using the EzTouch menu
This monitor features an on-screen display (OSD) and EzTouch
menu buttons that let you adjust settings. Your monitor saves
the settings, even if you turn off the monitor. Your monitor has
two levels of menus, and the functionality of the touch buttons
depends on the menu that is currently open:
• The shortcut menu (the first menu that appears) lets you
quickly change some of the most commonly accessed
settings.
• The main menu lets you access all of the functions of the
display and precisely adjust all levels of settings.
Tip
The first prompt you see is the language selection menu settings.
You must select a default language for the OSD before you can proceed.
To modify the language you select at a future time, use the Advanced
menu. If you cannot access the Advanced menu because you chose a
language you cannot read, do the following:
• Unplug the monitor from the power outlet for ten or more seconds.
• Plug the monitor back into the power outlet.
You will be prompted for the language selection menu settings again.
Important
If you turn on the monitor and no video inputs are connected, the
product tour starts. To disable the product tour, see “Power
management” on page 41.
8512322_XHD3000 Usr Gde.book Page 29 Friday, August 10, 2007 12:33 PM