Filter
Top Products
CHAPTER 3: Replacing notebook components
96
9 Remove the screws that secure the LCD panel to the LCD panel lid.
10 Remove the inverter by following the steps in “Replacing the inverter” on page 81.
11 Disconnect the web cam by following the steps in “Replacing the webcam” on
page 84. You do not need to remove the web cam.
12 Remove the old LCD panel from the LCD panel lid.
13 Place the new LCD panel into the LCD panel lid.
14 Reconnect the web cam by following the steps in “Replacing the webcam” on
page 84.
15 Replace the inverter by following the steps in “Replacing the inverter” on page 81.
16 Feed the wiring back into the hinge channels.
17 Replace the screws that were removed in Step 9.
18 Make sure that the magnet has remained in the magnet bracket.
19 Press the LCD panel front and back together. Press the two halves together in several
places until they click in place. You should find no loose spots or spots where the
two halves do not meet.
Important
If the LCD front panel backing have a double-sided tape when removing,
don’t forget to replace it with a new one when putting back.
Magnet bracket and magnet