www.gateway.com
77
9 Slide the black clip to the back of the notebook, then slide the cable out of the clip.
Be careful not to touch or damage any other components.
10 Remove the old keyboard cover.
11 Make sure the black keyboard cover connector clip is fully moved toward the back
of the notebook, insert the cable into the connector, then slide the black clip forward
to lock the connector in place.
12 Replace the keyboard cover by first inserting the tabs located on the front of the
cover into the slots provided, then pressing down on the back. Press down on the
cover in several places until it clicks in place. The cover is correctly mounted when
you can run you finger along the cover and find no loose spots. The cover should
be flat all the way across.
13 Close the LCD panel.
14 Turn your notebook over so the bottom is facing up.
15 Replace the screws removed in Step 2.
Important
The cable is correctly oriented if it is not twisted.
Caution
If the cover is not correctly replaced, your notebook could be damaged when
you try to close the LCD panel.