CHAPTER 3: Replacing notebook components
78
Replacing the keyboard
Tools you need to complete this task:
v
Screws removed during this task:
• 2 black M2.5×3 (Keyboard cover)
• 3 black M2.5x3 (Keyboard)
• 2 long black (Keyboard)
To replace the keyboard:
1 Complete the steps in “Preparing the notebook” on page 57.
2 Remove the keyboard cover by following the steps in “Replacing the keyboard
cover” on page 75.
3 Remove the five keyboard screws.
Important
Note the location of the long screw.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
Long screws