www.gateway.com
81
Replacing the inverter
Tools you need to complete this task:
v
Screws removed during this task:
• 2 black M2.5×3 (Keyboard cover)
• 6 black M2.5×8 (LCD front panel)
• 2 black M2.5×5 (inverter)
To replace the inverter:
1 Complete the steps in “Preparing the notebook” on page 57.
2 Remove the keyboard cover by following the steps in “Replacing the keyboard
cover” on page 75.
3 Open the LCD panel to the fully open position.
4 Remove the rubber inserts from the front of the LCD panel assembly.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver