Filter
Top Products
www.gateway.com
101
22 Make sure that the magnet has remained in the magnet bracket.
23 Press the LCD panel front and back together. Press the two halves together in several
places until they click in place. You should find no loose spots or spots where the
two halves do not meet.
24 Replace the LCD panel assembly screws removed in Step 7.
25 Replace the rubber inserts removed in Step 6.
26 Replace the LCD assembly by following the steps in “Replacing the LCD assembly”
on page 90.
27 Replace the keyboard by following the steps in “Replacing the keyboard” on
page 78.
28 Replace the keyboard cover by following the steps in “Replacing the keyboard
cover” on page 75.
29 Turn the notebook over so the bottom is facing up.
30 Reconnect the antenna wires to the wireless card by following the steps in
“Replacing the IEEE 802.11 wireless card” on page 65.
31 Replace the wireless bay cover by following the steps in “Replacing the IEEE 802.11
wireless card” on page 65.
Important
If the LCD front panel backing have a double-sided tape when removing,
don’t forget to replace it with a new one when putting back.
Magnet bracket and magnet