Gateway p-79 Laptop User Manual


 
www.gateway.com
125
Replacing the system board and VGA cooling
assembly
Tools you need to complete this task:
v
Additional materials you need to complete this task:
X-23-7762 thermal grease
Screws removed during this task:
2 black M2×3 (IEEE 802.11 wireless card)
1 black M2.5×5 (DVD drive)
2 black M2.5×3 (Keyboard cover)
6 black M2.5×8 (LCD front panel)
3 black M2.5x3 (Keyboard)
2 long black (Keyboard)
2 black M2.5×8 (Hinge bottom)
2 black M2.5×8 (Hinge top)
8 black M2.5×8 (Palm rest-bottom)
6 black M2.5×8 (Palm rest-top)
3 black M2.5×5 (Palm rest-top)
2 black M2×3 (Modem)
1 black M2.5×3 (Right speaker)
2 black M2.5×5 (EMI shield)
4 black M2.5×5 (System board)
To replace the system board and VGA cooling assembly:
1 Complete the steps in “Preparing the notebook” on page 57.
2 Remove the memory from the old system board and install it on the new system
board by following the instructions in “Adding or replacing memory modules” on
page 58.
3 Remove the cooling assembly by following the instructions in “Replacing the IEEE
802.11 wireless card” on page 65.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver