Filter
Top Products
www.gateway.com
75
Replacing the keyboard cover
Tools you need to complete this task:
v
Screws removed during this task:
• 2 black M2.5×3 (Keyboard cover)
To replace the keyboard cover:
1 Complete the steps in “Preparing the notebook” on page 57.
2 Remove the two keyboard cover screws from the inside of the battery compartment.
3 Use a plastic screw driver to release the latches.
4 Turn your notebook over so the top is facing up.
5 Open the LCD panel to the fully opened position.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver