Filter
Top Products
234 PMCS Interface Toolkit
Configuration
• Kilo Volt Inputs
• Kilo Amp Input
• Mega Watt Input
• Phase Reverse Limits
• Meter Setup
• Limits Set By
Relay 1 / Relay 2
• Phase Reversal
• Phase Imbalance
• Delay On
• Delay Off
Decimal Placement
• Volts Decimal Placement
This value decides the precision. User can change the values from 1 to 4.
• Amps Decimal Placement
This value decides the precision. User can change the values from 1 to 4.
• WATT Decimal Placement
• VOLTS Full Scale
If kilo volt inputs value is set then Voltage full-scale value is divided by 1000, showing the value in Kilo Volts.
• AMPS Full Scale
If kilo Amp inputs value is set then Amps full-scale value is divided by 1000, showing the value in Kilo Amps.
Reset
• WATT Hour
• VAR Hour
• VA Hour
Note: Configured is displayed in green, Enabled in red and Reset in Amber.