Filter
Top Products
42 PMCS Interface Toolkit
Lockout/Tagout Wizard
Usage
The Lockout/Tagout provides a method for assigning danger or ground tag graphics
to various one-line diagrams or wizards.
On-screen tags and indicators are for informational
purposes only and DO NOT represent real-world
conditions! Actual lockout status must be verified prior
to performing any work. Failure to follow appropriate
lockout procedures can result in SEVERE INJURY or
DEATH!
The Wizard consists of a single screen (shown above) displaying the presence or
absence of danger and ground tags for a particular device. The user installs or
removes Danger and/or Ground Tags using the Install/Remove buttons on the Tag
Assignment window shown above. Any wizards belonging to the same Status Group
will display Danger and/or Ground Tag indicators mirroring the tags installed in the
Tag Assignment window.
Supported Devices