GE GFK-1541B Network Card User Manual


 
Index
GFK-1541B Index Index-5
Simple isolated network configuration, 2-24, 2-
34, 2-49
Simple Network Time Protocol, 5-25
SNTP, 5-25
Software Loader, 2-14, 2-28, 2-39, 2-53
Software Loader Port
RS-485, B-4
Series 90-30 CPU364, 2-19, 2-31
Series 90-30 CPU364 Ethernet Interface, B-2
Series 90-70 Ethernet Interface (Type 2), 2-43
SQE, 2-46
Ethernet products, B-15, B-17
Station Address Label
Series 90-30 CPU364, 2-5, 2-20, 2-31
Series 90-70 Ethernet Interface (Type 2), 2-44
Station Manager Port, B-2
IC693CMM321, 2-5
Series 90-30 CPU364, 2-19, 2-31
Series 90-70 Ethernet Interface (Type 2), 2-43
Station Manager software, 1-7
Status address location, 2-23, 2-34
Status bits, 3-2, 3-4, 3-31, 3-33, 4-2, 4-3, 4-20,
4-21
Status data, Channel Commands, 3-4, 4-3
Status on a channel, 3-9
Subnet Addressing and Subnet Masks, 6-5
Subnet mask, 2-9, 2-24, 2-34, 2-49, 6-5
Subnets and Multiple Gateways, 6-5
T
Thick wire, 1-5
Thin wire, 1-4
Time units for command period, 3-11, 3-18, 3-
24, 4-9, 4-13, 4-14, 4-15
Timeout for Channel Commands, 3-12, 3-18,
3-24, 4-13, 4-14, 4-15, 4-17, 4-18, 4-19
Timestamping, Ethernet Global Data, 5-25
Transceiver
AAUI, B-14
Transceiver Port
Series 90-30 CPU364, 2-19
Series 90-30 Ethernet Interface, 2-5
Series 90-70 Ethernet Interface (Type 2), 2-44
Troubleshooting
Ladder programs, 3-45, 4-33
Using PLC Fault Table, 7-4
Using the Status bits and Communications
Status words, 3-32, 4-21
Troubleshooting the Ethernet Interface, 7-2
U
Updating Ethernet Interface software, 2-4, 2-
18, 2-42
Using the IC697CMM742 with PLC CPUs
(Versions 4.12 - 5.50), D-1
V
VersaPro software, 2-22, 2-33
W
Waiting for configuration from PLC, 2-14, 2-
28, 2-39, 2-53
Waiting for IP address, 2-14, 2-28, 2-39, 2-53