Filter
Top Products
Programming Techniques 13–9
File name 32sii-Manual-E-0424
Printed Date : 2003/4/24 Size : 17.7 x 25.2 cm
!
º
<
¸@
Tests to see if the correction is significant.
!
!
!
Goes back to start of loop if correction is
significant. Continues if correction is not
significant.
!
%
!
#$
%
Displays the calculated value of X.
Line T09 calculates the correction for X
guess
. Line T13 compares the absolute
value of the calculated correction with 0.0001. If the value is less than
0.0001 ("Do If True"), the program executes line T14; if the value is equal to
or greater than 0.0001, the program skips to line T15.
Flags
A flag is an indicator of status. It is either set (true) or clear (false). Testing a
flag is another conditional test that follows the "Do if true" rule: program
execution proceeds directly if the tested flag is set, and skips one line if the
flag is clear.
Meanings of Flags
The HP 32SII has 12 flags, numbered 0 through 11. All flags can be set.,
cleared, and tested from the keyboard or by a program instruction. The
default state of all 12 flags is clear. The three–key memory clearing operation
described in appendix B clears all flags. Flags are not affected by
z
b
{
} {
&
}.
Flags 0, 1, 2, 3, and 4 have no preassigned meanings. That is, their
states will mean whatever you define it to mean in a given program. (See
the example below.)
Flag 5, when set, will interrupt a program when an overflow occurs
within the program, displaying
#$
and
£
. An overflow occurs
when a result exceeds the largest number that the calculator can handle.
The largest possible number is substituted for the overflow result. If flag 5
is clear, a program with an overflow is not interrupted, though
#$
is displayed briefly when the program eventually stops.
Flag 6 is automatically set by the calculator any time an overflow occurs
(although you can also set flag 6 yourself). It has no effect, but can be