Filter
Top Products
134 Printer Interfaces EN
To configure the Novell NetWare parameters from the
printer control panel
1 Press MENU until HP EIO 1 or 2 MENU displays.
2 Press I
TEM until CFG NETWORK=NO displays.
3 Press V
ALUE until CFG NETWORK=YES displays.
4 Press S
ELECT once. CFG NETWORK=YES displays.
5 Press I
TEM until CFG IPX/SPX=NO displays.
6 Press V
ALUE until CFG IPX/SPX=YES displays.
7 Press S
ELECT once. CFG IPX/SPX=YES displays.
8 Press I
TEM until FRAME=AUTO displays.
9 To configure the frame type setting protocol, press V
ALUE to
select one of the frame types from the following table:
10 Press S
ELECT to save the value. An asterisk (*) displays.
11 If you are finished, press G
O to return the printer to the READY
state.
– OR –
See the appropriate sections for other protocols that will be used.
Frame type Description
AUTO (default) All listed Novell frame types will be allowed.
EN_8023 Limits frame types to IPX over IEEE 802.3 frames.
All others will be counted and discarded.
EN_II Limit frame types to IPX over Ethernet II frames.
All others will be counted and discarded.
EN_8022 Limit frame types to IPX over IEEE 802.2 with
Ethernet frames. All others will be counted and
discarded.
EN_SNAP Limit frame types to IPX over SNAP with Ethernet
frames. All others will be counted and discarded.