Filter
Top Products
EN Chapter 6 137
To configure Apple AppleTalk parameters from the
printer control panel
1 Press MENU until HP EIO 1 MENU displays.
2 Press I
TEM until CFG NETWORK=NO * displays.
3 Press V
ALUE until CFG NETWORK=YES displays.
4 Press S
ELECT once. CFG NETWORK=YES * displays.
5 Press I
TEM until CFG ETALK=NO * displays.
6 Press V
ALUE until CFG ETALK=YES displays.
7 Press S
ELECT once. CFG ETALK=YES * displays.
8 Press I
TEM. PHASE=1 or PHASE=2 displays.
9 Press I
TEM to retain the value and continue, or press VALUE to
change the phase parameter.
10 Press S
ELECT to save the new value.
11 If you are finished, press G
O to return the printer to the READY
state.
– OR –
See the appropriate sections for other protocols that will be used.