Filter
Top Products
TM 11-6625-2958-14&P
APPENDIX B
COMPONENTS OF END ITEM LIST
Section L
INTRODUCTION
B-1.
Scope
This appendix lists integral components of and
basic issue items for the PP-7545/U to help
you inventory items required for safe and efficient
operation.
B-2. General
.
This Components of End Item List is divided into
the following sections:
a. Section II. Integral Components of the End
item. Not applicable. The-se items, when assem-
bled, comprise the PP-754.5/U and must accom-
pany it whenever it is transferred or turned in.
The illustrations will help you identify these items.
b. Section III. Basic Issue Items. Not applicable.
These are the minimum essential items required
to place the PP-7545/U in operation, to operate
it, and to perform emergency repairs. Although
shipped separately packed they must accompany
the PP-7545/U during operation and whenever
it is transferred between accountable officers. The
illustrations will assist you with hard-b-identify
items. This manual is your authority to requisition
replacement BII, base don TOE/MTOE authoriza-
tion of the end item.
B-3. Explanation of Columns
a. Illustration. This column is divided as fol-
lows :
(1) Figure number. Indicates the figure num-
.
ber of the illustration on which the item is shown.
(2) Item number. The number used to iden-
tify item called out in the illustration.
b. National Stock Number. Indicates the Na-
tional stock number assigned to the item and
which will be used for requisitioning.
c. Description. Indicates the Federal item name
and, if required, a minimum description to iden-
tify the item. The part number indicates the pri-
mary number used by the manufacturer, which
controls the design and characteristics of the item
by means of its. engineering drawings, specifica-
tions, standards, and inspection requirements to
identify an item or range of items. Following the
part number, the Federal Supply Code for Manu-
facturers (FSCM) is shown in parentheses
d. Location The physical location of each item
listed is given in this column. The lists are de-
signed to inventory all items in one area of the
major item before moving on to an adjacent area.
e. Usable on Code. Not applicable.
f. Quantity Required (Qty Reqd). This column
lists the quantity of each item required for a
complete major item.
g. Quantity. This column is left blank for use
during an inventory. Under the Rcvd column, list
the quantity you actually receive on your major
item. The Date columns are for your use when you
inventory the major item.
(Next printed page is B-2.)
B-1