Filter
Top Products
Chapter 2 67
Opening Your Personal Workstation and Installing Accessories
Removing and Replacing the Left-Side and Front Panels
2. Place the hinge tabs of the top section into the hinge slots. To
complete this step, hold the top section of the front panel at a 15
degree angle to the front of the Personal Workstation and pull in the
direction of the arrow. See Figure 2-14.
Figure 2-14 Connecting the Top Section to the Personal Workstation
3. Close the top section by pushing it inward in the direction of the
arrow. See Figure 2-15. The retainer tabs should snap into place.
Figure 2-15 Closing the Top Section
View from
the top
15˚
Pull
Retainer Tabs
for the Front
Panel Top
Section
View from
the top
15˚
Push