Filter
Top Products
113
Changing Your Workstation’s Hardware Configuration
Replacing the Main Tray Assembly
4 Reconnect the power cables and any other cables or terminators that you
disconnected when opening the workstation.
5 Power on the monitor, any peripheral devices, and the system unit.
If you installed a new hard disk drive, go to Configuring a Hard Disk Drive
on page 135.
If you installed a new removable media device, refer to the following chap-
ters for information on using the device:
• Chapter 2 - Using Your CD-ROM Drive
• Chapter 3 - Using Your Digital Data Storage (DDS) Tape Drive
• Chapter 4 - Using Your 3.5-inch Floppy Drive