Filter
Top Products
19
System Overview
System Unit Rear Panel Connectors
documentation that accompanies each SCSI device for specific information
concerning its use. Refer to Appendix C for information about connecting
SCSI devices to your workstation.
NOTICE: When attaching external SCSI devices, be sure to terminate the last device
on the external SCSI bus with the appropriate terminator. If there are no
external SCSI devices, attach a SCSI terminator to the back of the system.
TOC Button
The TOC (transfer of control) button resets the system and transfers control
from the default device to an auxiliary device.
Power Cord Connector
Plug the workstation’s power cord into the power cord connector to provide
ac power to the system.