Filter
Top Products
186
SCSI Connections
Assigning SCSI Device IDs
5 Write in the SCSI device ID of any internal drives in Table 25.
6 Write in the type of external single-ended drives currently connected to your
workstation under the heading “External Device Drives” and each drive’s SCSI
device ID under the heading “Device ID.”
7 Add your new drive to the table if it is an external device. If it is an internal drive,
continue to Step 8.
Table 25 Single-Ended SCSI Device IDs
SCSI Device Drives
Internal Device ID
(Address) Number
(Only 0 through 6
Available)
External Device ID
(Address) Number
(Only 0 through 6
Available)
Internal System Drives:
System SCSI Drive(s)
____________________ ____________________
CD-ROM Drive (if present, uses ID
No.2) ____________________
N/A
4-mm DDS Tape Drive
(if present, uses ID No.1) ____________________
N/A
External Device Drives
N/A ____________________
1st __________________________ N/A
____________________
2nd __________________________ N/A
____________________
3rd __________________________ N/A
____________________
4th ___________________________ N/A
____________________
5th ___________________________ N/A
____________________
6th __________________________ N/A
____________________
7th __________________________ N/A
____________________
NOTICE: You can have no more than 7 single-ended SCSI devices (internal and external) con-
nected to the system.