Filter
Top Products
167
Changing Your Workstation’s Hardware Configuration
Installing the Optional Fast Wide Differential SCSI Controller
10 Slide the cutouts on the rear of the storage tray cover onto the pins on the
storage tray
and swing the cover into place, as shown in Figure 68.
11 Press down on the front edge of the cover to make sure that the locking
tabs on the storage tray fully engage the cover.
Figure 68 Replacing the Storage Tray Cover
12 If you are not connecting any external devices to the external FWD SCSI connec-
tor you must connect the FWD SCSI terminator.
13 Follow the instructions in Replacing the Main Tray Assembly on page 112