Filter
Top Products
132
Changing Your Workstation’s Hardware Configuration
Installing Storage Devices
Replacing the Storage Tray Cover
Perform the following procedure to replace the storage tray cover, as shown
in Figure 39:
1 Slide the cutouts on the rear of the cover onto the pins on the storage tray.
2 Swing the cover into place.
3 Press down on the front edge of the cover to make sure that the locking
tabs on the storage tray fully engage the cover.
Figure 39 Replacing the Storage Tray Cover
4 If you removed the storage tray, continue with the next section Replacing the
Storage Tray on page 133.
If you did not remove the storage tray, follow the instructions in Replacing the
Main Tray Assembly on page 112.