Filter
Top Products
Card is not fully inserted
Solution: Make sure you fully insert the memory card into the appropriate slot on
the product.
If the memory card is not inserted properly, the product will not respond and the green
Photo light (near the memory card slots) will blink rapidly.
After the memory card has been inserted properly, the Photo light will blink green for
a few seconds, and then remain lit.
Cause: The memory card was not fully inserted.
Paper messages
The following is a list of paper-related error messages:
•
Paper upside down
•
Paper orientation error
•
Ink is drying
Paper upside down
Solution: Load paper in the input tray print side down.
Cause: Paper in the input tray was upside down.
Paper orientation error
Solution: Insert paper into the input tray with the short edge forward and the print
side down. Slide the paper forward until it stops.
Cause: Paper in the input tray was in landscape orientation.
Ink is drying
Solution: Leave the sheet in the output tray until the message disappears. If it is
necessary to remove the printed sheet before the message disappears, carefully hold
the printed sheet on the underside or the edges, and place it on a flat surface to dry.
Cause: Transparencies and some other media require a drying time that is longer
than normal.
Power and connection messages
The following is a list of power- and connection-related error messages:
•
Improper shutdown
Improper shutdown
Solution: Press the On button to turn the product on and off.
Errors 95
Solve a problem