Filter
Top Products
The selected color effect is applied to the photo, and the photo is shown by itself on
the display.
To preview your edited photo
▲ Touch the Back icon until you return to the Options menu, then touch Print
Preview.
To print your edited photo
▲ Touch the Back icon until you return to the View Photos screen, then touch
Print.
Remove red-eye
The flash on a camera (especially on older model cameras) can sometimes cause a
subject's eyes to appear red in your photos. You can remove redness so that eyes appear
the correct shade in your photos.
NOTE: The changes you make to the photo apply only to viewing and printing the
photo. The changes will not be saved on the memory card, storage device, or CD/
DVD.
To remove red-eye from photos
1. Insert a memory card into the appropriate slot on the HP All-in-One, connect a storage
device to the front USB port, or insert a CD/DVD (label side up) into the LightScribe
drive.
The Photosmart Express menu appears, with the most recent photo shown on the
display.
2. Touch View.
The View Photos screen appears.
3. Touch
or to scroll through the thumbnails of your photos.
4. When the thumbnail of the photo you want to edit appears, touch it.
5. When the selected photo appears by itself on the display, press the Red Eye
Removal button on the control panel.
TIP: Another method is to choose Red Eye Removal from the Edit menu.
A red-eye icon blinks in the upper left corner of the photo, red-eye removal is applied,
and the photo is shown by itself on the display.
Automatically enhance your photos
The HP All-in-One is set up, by default, to enhance your photos automatically when you
print them. The changes are only visible on your printed output; you cannot see the
changes on the display.
When this feature is enabled, the HP All-in-One uses HP Real Life Technologies to:
• Adjust the brightness or darkness of your photos.
• Adjust the lighting to make dark images appear brighter.
• Sharpen blurry images.
Edit photos using the control panel 111
Photos