Filter
Top Products
6. When you have finished entering a name for the HP All-in-One, touch OK.
The name you entered will appear on your Bluetooth device when you connect to the
HP All-in-One to print.
7. Touch OK to exit the Setup menu.
Related topics
“
Enter text using the visual keyboard” on page 14
Set Bluetooth security for the HP All-in-One
You can enable printer security settings through the Bluetooth menu on the HP All-in-
One. Touch Setup on the display, and then touch Bluetooth. From the Bluetooth menu,
you can:
• Require passkey authentication prior to someone printing to the HP All-in-One from
a Bluetooth device.
• Make the HP All-in-One visible or invisible to Bluetooth devices that are within range.
This section contains the following topics:
•
Use a passkey to authenticate Bluetooth devices
•
Set the HP All-in-One to be invisible to Bluetooth devices
•
Turn the Bluetooth radio on and off
•
Reset Bluetooth settings on the HP All-in-One
Use a passkey to authenticate Bluetooth devices
You can set the security level of the HP All-in-One to either Low or High. The default
security setting is Low. Low level security does not require authentication.
• Low: This is the default security setting. Low level security does not require a
passkey, as it does not support authentication. Any Bluetooth device within range can
print to it.
• High: High level security requires a passkey, as it supports authentication. The
Bluetooth device must provide a passkey, before the HP All-in-One will allow the
device to send a print job to it.
NOTE: The HP All-in-One ships with a predefined passkey that is set to four zeroes
"0000".
To set the HP All-in-One to require passkey authentication
1. Touch Setup on the display.
2. Touch Bluetooth.
NOTE: If the menu option you want is not visible on the screen, touch or
to scroll through all the menu options.
3. Touch Passkey.
4. Touch Change.
Computer connection information 25
Finish setup