Filter
Top Products
Removal and replacement procedures 46
SAS hard drive
a.
Connect the appropriate SAS signal cable to the new hard drive (1).
b. Connect the appropriate power cable to the SAS signal cable (2).
7. Perform the post-installation procedure.
Optical disc drive
The server has a default slim-type 9.5 mm SATA optical disc drive. You can choose to replace this
default ODD with another model. The following SATA ODD models are supported:
• DVD drive
• DVD-RW drive
Guidelines for installing an optical disc drive
• Install only ODD models specified for your ProLiant server. Installing unsupported ODDs may
damage the system by consuming power and generating heat in excess of the system operating
tolerance. This condition may result in a loss of system and/or data integrity.
• If you removed the default ODD without plans of replacing it, reinstall the carrier in the chassis.
Cover the ODD bay with the ODD bay bezel (purchased separately).